Physics Laboratory Instruments Manufacturers, Physics Laboratory Instruments India, Physics Laboratory Instruments, Physics Laboratory Instruments Suppliers, Narayani Enterprises
 
   
   
     
 

 
 

CATEGORIES

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 [70] 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 [«Back ||Next »]
 

Physics Laboratory Instruments : 504 record(s)

Wave Motion Machine Manufacturer

Click here

Wave Motion Machine

Used to demonstrate the formation of both transverse and longitudinal waves. Apparatus comprises of 16 vertical steel rods length 140 mm and 8 long ‘L’ shaped steel rods of different size which rests on 24 casted aluminium discs mounted on a horizontal steel shaft. This shaft is rotated by means of a bakelite handle at the right hand end of apparatus. With two casted side supports 175 mm high having two horizontal steel supports for vertical rods and one vertical steel supports with a groove for ‘L’ shape steel rods. Mounted on wooden base 350 x 170 mm fitted with four plastic feet. Overall height 445 mm.
 
Catalogue No.
Enquiry
MS296

Waves Manufacturer

Click here

Waves

Apparatus comprises a wooden resonance box size 1115 x 115 x 80 mm length x width x height with two rules of one meter length. One each brass and steel wire attached to end plates and tensioned by fine adjustment pegs. Two movable bridges, a pulley and a fixed screw for third wire to be fixed for tensioning by masses.
 
Catalogue No.
Enquiry
MS297

Waves Apparatus Manufacturers Suppliers India

Click here

Waves Apparatus

Comprising a wooden base board 690 x 90 mm fitted on four feet. Fitted with two steel wires 1 m long 0.315 mm diameter attached to fine adjustment pegs and two 50 N spring balances. Three bridges, one large to span both wires.
 
Catalogue No.
Enquiry
MS298

Tuning Forks Manufacturer

Click here

Tuning Forks

Nickel plated, prong length approx. from 115 mm to 80 mm for C 256 to C 512, with frequency marked. Supplied in a velvet lined wooden box with frequency 256 to 512. (i) Set of eight (ii) Set of thirteen In highly calibrated, accurate frequencies or general for students.
 
Catalogue No.
Enquiry
MS299

Tuning Fork Mounted Manufacturer

Click here

Tuning Fork Mounted

Set of two or four, mounted on a single resonance box. Supplied complete with wooden hammer.
 
Catalogue No.
Enquiry
MS300


 
 
Home|About us|Products|Enquiry|Contact Us
Copyright © 2008-2009 Narayani Enterprises. All Rights Reserved.