|
| Most versatile, highly reliable incubator for low temperature
incubation and routine determination of Bio- chemicals
Oxygen demand, for tissue cultures, for preservation of
vaccines, insulin, liver extracts, chemicals, for enzyme
testing etc. Sturdy, triple walled construction, insulated with
thick blanket of fine glass wool between the intermediates
and exterior wall to prevent heat loss which forms the main
structured. Outer casing is of mild steel finished in white
stove enamel. Inner chamber of thick anodized Aluminium
sheet or stainless steel with support positions for three
shelves, of anodized aluminium or Stainless steel. Lock and
key arrangement the front double walled door. Fitted with a
door operated lamp for illumination inside the chamber.
Temperature ranges from 5 C above ambient to 50 C
adjustable at any desired point by means of a high precision
double action thermoregulator with in the variation of ±1C.
Unit also provided with a air circulation fan to keep the
temperature uniform inside the chamber. For lower
temperature work a hermetically sealed, high performance
cooling unit compressor is provided at the lower portion of
working chamber. Heating arrangement is made in the inner
chamber to work at higher temperature. Nichrome wire
heating element. All controls and circuitry are housed at the
top of the incubator and therefore protected from spillage.
Panel given with toggle switch, thermoregulator which allows
the user to select and set temperature at any desired level,
indicating lamps, a voltmeter on the panel to read the
incoming voltage and to read temperature L-shaped
prismatic thermometer is provided at the top of front door. A
safety cut out is provided which switches off the heaters in
the event of failure of normal temperature control system to
protect the specimens from excessive heat. Supplied with 1.5
m three core cable to work on 220 V 50 Hz AC.
Type with Inner chamber size height x width x depth mm
(i) 825 x 500 x 415 (ii) 865 x 565 x 565 (iii) 900 x 650 x
575
|
| |
|
|
