|
For a class B & C fire. It takes less than 10 seconds to activate a
DCP fire extinguisher by a simple three step activation
process. With easy pull to unlock the seal with the light
pressure. By pulling the lever down with a simple palm action
and release depresses the plunger there by activating the
cartridge. Direct the hose at the base of fire and gently
pressing the lever a second time releases the powder directly
into the fire. User can direct it in different directions and fight
multiple fire points without wasting precious extinguishing
agent. A used/unused indicator shows if the extinguisher is
usable or not. With sticker and clear graphic symbols make
the instructions easy to understand, avoiding confusion at a
critical moment. Deep drawn body with a single weld line
reducing the potential area of weakness. Cylinder is lead
tinplated from both inside and outside and then coated with
antirust expoxy paint for through protection against
2
corrosion. Each cylinder is pressure tested at 35 Kg/cm for
2
safety. Cartridge tested upto 250 Kg/cm and lead-tin plated
both from inside and outside and then powder coated on the
outside. Each cartridge with accurate CO filling.
Technical Specification
(For 5 kg) (For 10kg.)
Diameter of container 150 mm 175 mm
Height including fitting 465 mm 600 mm
Discharge time 14 sec. 22 sec.
Gross Weight 10.4 kg 17.9 kg
|
| |
|
|
